The most comprehensive guide to engine oil ever!
Release time:
2018-08-14
● The function of engine oil:
1. Lubrication and Wear Reduction: Between the piston and the cylinder, as well as between the crankshaft and the bearing shells, rapid relative sliding occurs. To prevent excessive wear of these components, an oil film must be established between the two sliding surfaces. A sufficiently thick oil film separates the mating surfaces, thereby reducing wear.
2. Cooling: Engine oil carries heat back to the oil pan and then dissipates it into the air, helping the radiator cool the engine.
3. Cleaning and Filtration: High-quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine components back to the oil pan via the lubrication system, thereby flushing away contaminants that accumulate on the working surfaces of the parts.
4. Sealing and Leak Prevention: Engine oil forms a sealing ring between the piston rings and the piston, reducing gas leakage and preventing external contaminants from entering.
5. Rust and Corrosion Prevention: Lubricating oil adheres to the surface of components, preventing contact between water, air, acidic substances, and harmful gases and the parts.
6. Shock Absorption and Buffering: When the pressure at the engine cylinder port rises sharply, the load on the piston, piston rings, connecting rod, and crankshaft bearings increases abruptly. Through the lubrication provided by the bearings, this load is transmitted, thereby mitigating the impact and providing a buffering effect.
● Classification of engine oils:
Currently, motor oils on the market can be broadly classified into two types based on their base oils: mineral oil and synthetic oil (vegetable oil is excluded due to its limited production). Synthetic oils, in turn, are further divided into fully synthetic and semi‑synthetic. Fully synthetic motor oil represents the highest grade.
The key differences between the two are: synthetic oils offer a broader operating temperature range, a longer service life, and a higher cost; for the same oil‑film requirements, synthetic oils can achieve them at lower viscosities, whereas mineral oils require significantly higher viscosities to meet those specifications. Under identical operating conditions, although synthetic oils have a much longer service life than mineral oils—resulting in higher upfront costs—the overall cost is only slightly higher when factoring in the reduced frequency of oil changes.
Lubricant viscosity is typically indicated by SAE grades, where SAE stands for the Society of Automotive Engineers. For example, SAE 15W‑40 and SAE 5W‑40: the “W” denotes winter, and a lower number before it indicates better low‑temperature fluidity, meaning the oil can be used at lower ambient temperatures and provides superior protection to the engine during cold starts. The number following the “W” (immediately after the hyphen) reflects the oil’s high‑temperature performance; a higher value signifies improved protective properties under elevated temperatures.
(SAE) Applicable ambient temperature (°C)
5W withstands external low temperatures down to -30°C.
100,000 cycles of resistance to external low temperatures of -25°C
150,000 cycles of resistance to external low temperatures of -20°C
20W rated for external low temperatures down to -15°C
30 withstands external high temperature of 30°C
40 withstands external high temperatures of 40°C
50 withstands external high temperatures of 50°C
● Oil classification:
The “S”-series denotes oils for gasoline engines, with specifications including: SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM. The “C”-series denotes oils for diesel engines, with specifications including: CA, CB, CC, CD, CE, CF, CF‑2, CF‑4, CG‑4, CH‑4, CI‑4. When both “S” and “C” appear together, it indicates that the oil is suitable for both gasoline and diesel engines.
From “SA” all the way to “SL,” with each successive letter, the oil’s performance is superior to the previous grade, and it contains a greater number of additives designed to protect the engine. The further the letter is toward the end of the alphabet, the higher the quality grade; among international brands, most oils are rated at SF or above.
Having just reviewed the basics of engine oil, you’re probably left with many questions. Let’s move on to addressing them:
★Question 1: Is top-grade fully synthetic motor oil suitable for all types of vehicles?
As we’ve just discussed, fully synthetic motor oil indeed delivers outstanding performance, with excellent fluidity—whether it’s a cold start in winter or superior resistance to high temperatures in summer—and it boasts a long drain interval, providing maximum protection for the engine. However, fully synthetic oil isn’t well-suited for micro‑ and small‑displacement cars priced at just a few tens of thousands of yuan...
In economy‑class cars priced around a few tens of thousands, the engine’s machining precision is relatively low, and the clearance between the cylinders and piston rings isn’t tightly sealed. These engines are often found in lower‑priced models, where a thicker, more viscous oil is needed to ensure proper sealing. If a thinner, fully synthetic oil is used, the seal can suffer slightly, leaving the engine feeling underpowered. Moreover, after the car is parked, most of the synthetic oil drains back into the oil pan, compromising lubrication and sealing. As a result, the engine experiences greater wear when started in the morning. By contrast, using a moderately viscous, mid‑grade oil in such an engine would avoid these issues.
Therefore, fully synthetic motor oil is a high-quality lubricant, but it is not well suited for low-cost, economy‑class vehicle engines.
★Question 2: How to choose engine oil for a turbocharged engine—If the ECU has been reprogrammed, it’s recommended to use fully synthetic oil.
If it’s a standard turbocharged car, the factory‑spec oil will suffice. But if you’ve had the ECU remapped, please read the following carefully:
Because turbochargers operate at extremely high speeds, no ball bearing can withstand the stresses of 100,000 rpm. Therefore, the main shaft is not directly connected to the turbine housing; instead, it employs a floating‑type design, with the shaft suspended in engine oil. The narrow gap between the turbine housing and the main shaft is filled with flowing oil, which both lubricates the components and helps remove contaminants while dissipating heat.
This is where the problem lies. Taking the Bora 1.8T as an example, the factory‑stock boost pressure of 0.38 bar typically corresponds to engine speeds between 100,000 and 150,000 rpm, and the stock oil is perfectly capable of handling both these speeds and the associated heat dissipation. However, after remapping the ECU, the boost pressure skyrockets, driving the turbocharger up to 200,000–300,000 rpm. At this point, the stock oil simply can’t keep up: being far from a top‑grade fully synthetic formulation, it has higher viscosity and poorer flow characteristics. As a result, when the main shaft spins at such extreme speeds, the oil fails to deliver adequate lubrication and cooling. What’s more, some owners opt for aftermarket oils that are even lower in grade than the factory‑spec oil; under these conditions, the oil can begin to burn, leading to the kind of damage we mentioned earlier—namely, turbocharger failure.
Fully synthetic motor oil is relatively thinner, offering superior lubrication and heat dissipation. As turbocharger speeds increase, this thinner oil can flow completely to all lubricated areas, thereby avoiding the many issues mentioned earlier.
★ Question 3: Why do German cars typically have their oil changed every 7,500 to 10,000 kilometers, while Japanese cars require an oil change every 5,000 kilometers?
This is the relationship between mineral oil and synthetic motor oil that we discussed earlier. For most Japanese‑made cars priced under 300,000 yuan, the factory‑installed oil is typically mineral oil, and the oil‑change interval should not be too long—generally around 5,000 kilometers. For mid‑ to high‑end Japanese models priced above 300,000 yuan, semi‑synthetic oil is usually used, which can extend the oil‑change interval to roughly 7,500–10,000 kilometers.
For German-brand cars priced around 150,000 yuan, the factory‑installed oil is typically semi‑synthetic, so the recommended oil‑change interval is naturally 2,500 kilometers longer than that of comparable Japanese models. Meanwhile, many German vehicles priced above 200,000 yuan come with fully synthetic factory‑filled oil, allowing the oil‑change interval to theoretically exceed 10,000 kilometers.
★Question 4: Why do high-end cars all tend to consume a bit of engine oil?
High-end vehicles typically use fully synthetic motor oil, and many supercars even rely on ultra‑low‑viscosity 0W‑50 racing oils. Better fluidity means lower viscosity, which offers numerous advantages as previously discussed; however, a downside is that the thinner oil is more likely to seep into the combustion chamber through the gap between the cylinders and piston rings, leading to significantly higher oil consumption compared to mainstream passenger cars.
It’s virtually inevitable that high-end cars will consume some engine oil—unless you use premium-grade oil. However, if the consumption exceeds half a liter every 2,000 kilometers, that’s considered problematic and not within the normal range.
★Question 5: Is it okay to change only the engine oil and not the oil filter?
Oil not only provides lubrication; it also plays a crucial role in carrying away contaminants from inside the engine. These impurities are captured by the oil filter. If you change the oil without replacing the filter, the contaminants won’t be fully removed, rendering the oil change essentially pointless. Replacing the oil filter is mandatory whenever you change the oil—this is an ironclad rule.
★Question 6: Is the used engine oil always black?
Inside the engine, motor oil primarily lubricates various components, with the most critical function being the lubrication of the pistons and cylinder walls. During operation, combustion produces dark, resinous deposits, which is why the oil begins to darken from the very first day it’s put into the engine. However, properly maintained oil should be a deep brown color; if it turns an almost jet‑black shade, that’s a cause for concern—most likely because the oil‑change interval has been too long.
★Question 7: Can motor oils from different brands be mixed?
Each brand of engine oil additive is unique; mixing them may lead to chemical degradation, so we strongly advise against doing so.
★Question 8: Car owners across the country, what are the key considerations when choosing motor oil?
In Northeast China, Xinjiang, and Tibet, it is recommended to use the relatively thin, low‑temperature‑resistant 5W series of motor oil. In extremely cold regions, such as the Arctic and Antarctic circles, engine oil may even be of the 0W series.
In North China, East China, and South China, it is recommended to use standard 5W‑30/40 or 10W‑30/40 motor oil.
In extremely hot regions like Hainan, it’s recommended to use 40- or 50-grade motor oil—high-temperature resistance is essential.
Latest Updates
Due to recent heavy rainfall in several cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?
Before we knew it, the Spring Festival holiday is already over, and the Mengshi team has been back at work for two days now. During the holiday, we visited relatives and friends...
[Lion’s Classroom] All About Wheel Alignment
Wheel alignment is based on the vehicle’s four-wheel parameters and involves adjustments to ensure optimal driving performance and a certain level of reliability...
[Lion’s Classroom] Spark Plug Mini-Class
Our cars have thousands of components, each of which is essential. Yet many drivers focus solely on oil changes during maintenance, overlooking small parts like spark plugs. Today, we’ll show you how to determine for yourself whether your spark plugs need replacing.
[Lion’s Classroom] Handy Tips for Tire Maintenance
A journey of a thousand miles begins with a single step. Tires are like the shoes of a car—their condition directly affects driving safety. That’s why tire safety is of paramount importance, and regular maintenance is essential. Now, let’s take a look with the editor at how to properly care for your car’s tires!
Recently, Volvo officially awarded Mingshi Lubricants the VCC RBS0-2AE standard certification for its SN 0W20 product. One technological breakthrough after another has once again demonstrated the exceptional quality of Mingshi Lubricants.