新闻中心

新闻中心

NEWS CENTER

[Secret Tips] Nine Essential Fuel-Saving Driving Techniques—We’re Revealing Them All!

Release time:

2018-12-05


Wendii Lion Lubricant 2018-12-06

 

With oil prices on the rise, promoting fuel efficiency is essential—both from an economic standpoint and in terms of environmental protection. Experience shows that increased fuel consumption is closely linked to driving habits, operating conditions, and the quality of vehicle maintenance and repairs. Even for the same car, differences in driving skill can lead to fuel‑consumption variations of 8% to 15%. To keep your “horse” running smoothly while minimizing its “grazing,” consider these tips.

2018.12.05

Tip #1: Warm up the car before you start.

In winter, when temperatures are low, warming up the car before driving can make a noticeable difference in fuel consumption. Generally, it’s advisable to let the engine idle for one to three minutes before setting off, allowing the coolant temperature to reach around 40°C. Then, drive steadily for 1–2 kilometers before accelerating. This approach helps reduce fuel consumption and is beneficial for both the engine and other vehicle components.

 

 

Secret Weapon No. 2: Gentle Start

Start in a low gear, gently press the accelerator pedal, and accelerate smoothly. Once the vehicle reaches a certain speed for that gear, learn to listen to the engine’s sound and gradually shift up through the gears. This helps reduce engine warm-up time and improves fuel efficiency. Revving the engine aggressively at startup not only damages the vehicle but also significantly increases fuel consumption.

Tip #3: Maintain an economical speed.

The optimal cruising speed for most passenger cars lies between 60 km/h and 80 km/h; driving at this speed maximizes fuel efficiency. Both excessively high and excessively low speeds are detrimental to fuel economy. At low speeds, the piston moves more slowly, leading to incomplete combustion. At high speeds, increased intake air velocity raises intake resistance, both of which contribute to higher fuel consumption.

Tip Four: Gently lift your foot off the accelerator.

Gently lifting your foot off the accelerator can save fuel. By contrast, abruptly releasing the throttle causes the engine speed to drop suddenly, creating engine braking that counteracts some of the vehicle’s forward momentum and induces vibrations, thereby increasing fuel consumption.

Tip Five: Shift gears promptly.

Shifting gears should be quick and timely—especially when driving on inclines. The shorter the shift time, the better the vehicle’s power performance and the greater the fuel savings. If you fail to shift promptly and coordinate your footwork poorly, resulting in unnecessary idling of the accelerator, fuel consumption will inevitably increase significantly.

Tip Six: Reduce Brake Usage

Braking is essentially a process of energy conversion, and it involves the dissipation of energy. Therefore, when approaching intersections or descending slopes, you should lift your foot off the accelerator well in advance. If the vehicle’s performance permits, you can also shift into neutral to let the car coast, allowing it to decelerate naturally and achieving the goal of “using coasting instead of braking.”

Tip 7: Maintain a safe following distance.

If the road is congested and the vehicle ahead frequently brakes, maintain a sufficient following distance. This allows you to decelerate smoothly and reduce the number of braking events, thereby improving fuel efficiency.

 

 

Tip 8: Driving in a higher gear saves fuel.

In general, drive in the highest gear possible and use the intermediate gears sparingly. On urban roads like those in Guangzhou, once your speed reaches 40 km/h or more, you can safely shift into fifth gear.

Of course, avoid dragging the gear in a high gear. Learn to shift based on the engine’s sound, and familiarize yourself with your vehicle’s characteristics. Before the engine starts to “shudder,” downshift to build up speed, then re‑engage the higher gear.

When a vehicle is in motion, shifting into neutral and allowing it to coast using its own kinetic energy or the potential energy of a downhill grade is called gliding. During gliding, the engine typically runs at idle, consuming only a minimal amount of fuel; therefore, gliding is an effective fuel-saving driving technique.

Gliding can be categorized into accelerating gliding, decelerating gliding, and downhill gliding. Accelerating gliding is performed on flat, wide, straight roads with minimal pedestrian and vehicle traffic: first, the rider accelerates; once the speed reaches a certain level, they shift into… Use neutral gear to let the car coast by inertia. If the vehicle has good acceleration, it takes less time to speed up and consumes less fuel. Accelerating while coasting is an effective way to save fuel. Deceleration coasting involves shifting into neutral well in advance when you need to slow down, using coasting instead of braking. This reduces the energy wasted on unnecessary braking, saving fuel and minimizing wear on mechanical components. However, always prioritize safe driving. Remember: never coast in neutral after snow or rain.

While the car is driving During operation, keep an eye on the coolant temperature gauge; the engine’s normal operating temperature should remain between 80 and 90°C. Temperatures that are too high or too low will both increase fuel consumption. In particular, if the coolant level is insufficient, the temperature can rise rapidly. When the coolant temperature exceeds 95°C, fuel consumption increases by 30% to 40% compared with normal operating conditions, and this can easily lead to accelerated wear and damage to engine components.  

 News

Meanwhile, if you notice the car lacks power, pull over and check the tires for leaks. Low tire pressure can significantly increase fuel consumption.  

 News

Regularly check the lubricant and engine oil levels, and replace the lubricant and engine oil according to the scheduled maintenance intervals.

Quality motor oil!

If you’re interested in joining our project, please leave a message promptly—our team will get in touch with you right away and arrange for a call from one of Kangzhong’s representatives.

Mengshi fully synthetic lubricant boasts exceptional shear stability, ensuring reliable performance even under demanding operating conditions.

Effective lubrication that extends engine life—this high‑end product has been proven by racing teams and champion drivers. product

[Secret Tips] Nine Essential Fuel-Saving Driving Techniques—We’re Revealing Them All!

Latest Updates

When assessing damage to a vehicle that has been flooded, which parts must be replaced, and which can be reused?

Due to recent heavy rainfall in several cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?

Happy New Year Start! Back from the Spring Festival—here are some essential car‑care tips you should know!

Before we knew it, the Spring Festival holiday is already over, and the Mengshi team has been back at work for two days now. During the holiday, we visited relatives and friends...

[Lion’s Classroom] All About Wheel Alignment

Wheel alignment is based on the vehicle’s four-wheel parameters and involves adjustments to ensure optimal driving performance and a certain level of reliability...

[Lion’s Classroom] Spark Plug Mini-Class

Our cars have thousands of components, each of which is essential. Yet many drivers focus solely on oil changes during maintenance, overlooking small parts like spark plugs. Today, we’ll show you how to determine for yourself whether your spark plugs need replacing.

[Lion’s Classroom] Handy Tips for Tire Maintenance

A journey of a thousand miles begins with a single step. Tires are like the shoes of a car—their condition directly affects driving safety. That’s why tire safety is of paramount importance, and regular maintenance is essential. Now, let’s take a look with the editor at how to properly care for your car’s tires!

[Lion·Certification] Warmly celebrate the official certification of Lion Lubricants’ 0W-20 series by Volvo!

Recently, Volvo officially awarded Mingshi Lubricants the VCC RBS0-2AE standard certification for its SN 0W20 product. One technological breakthrough after another has once again demonstrated the exceptional quality of Mingshi Lubricants.