Unbearable! How many of the seven worst driving habits that damage your car do you practice?
Release time:
2018-08-14
The same car, driven by two different people, will end up in vastly different conditions after many years—perhaps one remains as good as new, while the other may already be headed for the scrapyard. This is the result of differing driving habits, and poor habits can even accelerate your vehicle’s depreciation. Car owners might want to take a self‑check: do you exhibit any of these seven common bad driving practices?
Driving in a low gear at high speed
Many drivers of manual‑transmission vehicles, either out of convenience or because they’re still getting used to shifting when first behind the wheel, keep the same gear even when the vehicle speed has climbed high enough that a mismatch between speed and engine RPM causes noticeable vibrations. In fact, driving at high speeds in too low a gear puts excessive strain on the engine and can cause significant damage. Experienced drivers all agree: don’t be lazy—shift gears promptly and appropriately based on your speed.
Another common misconception that can seriously harm your engine is using higher gears to overtake. In fact, at higher gear ratios, the engine produces less torque and responds less crisply to throttle input, failing to deliver the desired acceleration. The correct approach is to downshift proactively when accelerating to pass. For automatic‑transmission vehicles, when the driver presses the accelerator pedal firmly, the vehicle’s control unit automatically detects this and downshifts to provide sufficient torque for overtaking—provided the driver presses the pedal deeply enough.
Prolonged semi-clutch condition

The clutch should not be kept in the half‑engaged position for extended periods, as this can damage the clutch.
Some drivers habitually keep their left foot on the clutch while driving, believing this helps them maintain better control. In reality, however, this practice severely damages the clutch disc. Particularly when cruising at high speeds, prolonged semi‑clutch engagement can cause the clutch to wear out rapidly. Similarly, starting in second gear also leads to premature clutch failure. Starting in first gear is the correct approach for all vehicle types.
Shifting gears before fully disengaging the clutch
In everyday driving, we often see impatient drivers attempting to shift into gear before fully depressing the clutch. Not only does this make it difficult to engage the gear accurately, but over time, such habits can cause serious damage to the manual transmission. Although automatic transmissions don’t require clutch operation for gear changes, many drivers still rush to put the car in Park before it has come to a complete stop, a practice that likewise puts undue stress on the transmission by mismatching driving conditions with proper operating procedures.
Seeing speed bumps as if they weren’t there.

Currently, most speed bumps in China are as shown in the figure. When driving over them, be sure to reduce your speed and avoid driving with one side of the vehicle on the bump.
Many careless drivers, when going over speed bumps, merely slow down slightly before carelessly plowing right over these “bumpy roads.” While passing over a speed bump inevitably subjects the vehicle to some impact, keeping the speed low helps keep that impact within the vehicle’s tolerance. However, driving over it at high speed amplifies the force of the impact, potentially damaging the car. When drivers choose to cross a speed bump on one side of the tire at a time, it can lead to inaccuracies in judging the height of the bump; moreover, the suspension on the side of the vehicle that actually contacts the bump is more likely to absorb the shock, resulting in uneven loading across the vehicle’s left‑right suspension system.
It’s often hard to spot a vehicle’s shock absorbers, springs, and suspension system, yet these are among its most vulnerable components. When driving over bumps or curbs, slow down in advance instead of charging straight through—this not only ensures ride comfort but also helps protect the shock absorbers, springs, and suspension. Many drivers leap onto curbs to show off their driving skills, but one day the shock absorbers or springs may no longer respond as you expect.
Overheating the engine wastes fuel, damages the vehicle, and wastes time.
Many car owners habitually warm up their engines by idling in place. In fact, this method is not only of limited effectiveness but also wastes fuel and time. (Unless under special circumstances or in exceptionally cold regions,) the correct approach is to let the engine idle for about 30 seconds, then drive off immediately. However, since both the engine and the drivetrain have not yet reached their normal operating temperature at this point, you should keep the engine speed around 2,000 rpm; only after the coolant temperature has stabilized should you increase the revs.
Single-sided speed bump
Many drivers, when crossing speed bumps like these, prefer to roll over them with only one side of the wheels, believing this reduces impact and minimizes damage to the vehicle. In reality, however, the opposite is true: this habit of unevenly loading the suspension by driving over speed bumps on one side can easily harm the suspension system and compromise the wheel alignment angles.
Frequent random parking on uneven roads can easily cause the vehicle frame to deform.
Prolonged parking on uneven road surfaces can easily damage the vehicle’s frame and suspension.
As the number of vehicles on the road continues to grow, parking has become a widespread social issue. When choosing a parking spot, drivers typically focus on the surrounding environment—such as how easy it is to drive out and whether the car might get scratched—while paying little attention to the condition of the pavement itself.
To find a parking spot in bustling urban areas, many drivers resort to parking their cars on curbs or, out of necessity, on uneven road surfaces. While this practice may cause little harm if used only briefly, prolonged parking—especially in places like workplaces or residential complexes—can place disproportionate stress on the tires and suspension on the lower side of the vehicle, accelerating wear and tear on the suspension system. In more severe cases, it can even lead to frame deformation, which is notoriously difficult to repair.
In summary, the issues mentioned above are common challenges drivers face in everyday driving. Yet many car owners dismiss them as minor and overlook them. Over time, these habitual bad practices can accumulate, exposing underlying problems and creating potential safety risks. Additionally, some drivers lack basic knowledge of driving techniques and vehicle maintenance, leading to more severe mechanical damage. If you find yourself engaging in any of these bad habits, it’s high time to correct them—you’ll soon discover that proper driving can make your journeys smoother and more enjoyable.
Latest Updates
Due to recent heavy rainfall in several cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?
Before we knew it, the Spring Festival holiday is already over, and the Mengshi team has been back at work for two days now. During the holiday, we visited relatives and friends...
[Lion’s Classroom] All About Wheel Alignment
Wheel alignment is based on the vehicle’s four-wheel parameters and involves adjustments to ensure optimal driving performance and a certain level of reliability...
[Lion’s Classroom] Spark Plug Mini-Class
Our cars have thousands of components, each of which is essential. Yet many drivers focus solely on oil changes during maintenance, overlooking small parts like spark plugs. Today, we’ll show you how to determine for yourself whether your spark plugs need replacing.
[Lion’s Classroom] Handy Tips for Tire Maintenance
A journey of a thousand miles begins with a single step. Tires are like the shoes of a car—their condition directly affects driving safety. That’s why tire safety is of paramount importance, and regular maintenance is essential. Now, let’s take a look with the editor at how to properly care for your car’s tires!
Recently, Volvo officially awarded Mingshi Lubricants the VCC RBS0-2AE standard certification for its SN 0W20 product. One technological breakthrough after another has once again demonstrated the exceptional quality of Mingshi Lubricants.