When assessing damage to a vehicle that has been flooded, which parts must be replaced, and which can be reused?
Release time:
2021-07-30
How should flooded vehicles be assessed for damages, inspected, and repaired?
Due to recent heavy rainfall in some cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?
01 How should damage to a flooded vehicle be assessed?
The assessment of damage to water‑submerged vehicles is primarily based on the height of the water level at the point of submersion, which helps determine the extent of the vehicle’s damage and, in turn, the cost of replacement parts and the corresponding repair labor hours. In practice, we typically classify water‑submerged vehicles into four severity levels.
When the floodwater level is above the vehicle floor and water has entered the cabin, with the water level below the seats, the damage is classified as “Level 1.” If the floodwater rises above the seat cushions but remains below the dashboard, the damage is rated as “Level 2.” When the water level exceeds the dashboard, the damage is classified as “Level 3.” If the floodwater reaches or surpasses the roof, the damage is designated as “Level 4.”
In addition to the water depth, the duration of submersion is another critical factor in damage assessment; the length of time a vehicle remains submerged significantly affects the extent of the damage. If the submersion is brief and rescue efforts are prompt, certain damaged components can be repaired and reused. However, prolonged submersion renders these components impossible to clean and dry, resulting in their scrapping and escalating losses.
02 Post-Wading Vehicle Inspection and Maintenance Procedure
Recently, heavy rainfall in several cities has led to a surge in vehicle repairs caused by driving through floodwaters. However, many mechanics lack the proper procedures and techniques, resulting in improper post‑flood repairs that necessitate additional work down the line.
Below, we’ll walk you through the repair procedures and methods for vehicles that have been submerged in water, helping you accurately and swiftly assess the extent of water damage and develop an appropriate repair plan to prevent technical mishaps.
After completing the maintenance inspection according to the procedure shown in the diagram, it is also necessary to establish clear criteria for component replacement.
1. After driving through water, it is generally recommended to replace any components that have taken on water; all fluids within the vehicle’s maximum wading depth must also be replaced.
2. After driving through water, internal corrosion of electronic components and an increase in resistance may occur; replacement is also recommended. In addition, all wiring harness connectors must be cleaned, and the harness should be replaced if necessary.
03 Detailed Inspection Procedures for Water-Submerged Vehicles
(1) Power System:
1. Inspection of the engine compartment
If a vehicle stalls while driving through water, the intake system and lubrication system should be inspected, and a cylinder‑internal endoscopic examination should be performed.
When driving through water with the engine running and not stalled, inspect the intake system and engine oil for any signs of water, and perform a cylinder‑pressure test. If the cylinder‑pressure test is normal, no engine repair is necessary.
2. The non-engine components include the transmission, differential, transfer case, exhaust system, and other parts. The primary inspection involves checking whether water has entered the gear oil; if water is present, the gear oil or the corresponding drivetrain components must be replaced.
3. When water enters the exhaust pipe, thoroughly remove all moisture and allow it to dry completely.
(2) Interior Inspection:
1. Remove the carpet and any removable sound‑insulating materials. Inspect the exposed wiring harnesses and their associated connectors. Examine the electrical components mounted beneath the carpet and seats.
2. Inspect the components mounted within the A-pillar, B-pillar, C-pillar, and D-pillar, including seat belts.
3. Inspect the exposed sections of the heater ductwork.
(3) Inspection of peripheral components:
1. Exterior vehicle components: Check whether the exterior lighting fixtures have been exposed to water and verify that the lighting functions properly; inspect the door handles and locks to ensure they open and close smoothly; and examine the door wiring harness for any signs of water ingress.
2. Engine Compartment: Inspect the vacuum booster and power steering system for water ingress, verify their proper operation, and check the engine wiring harness for water damage.
3. Inspect the trunk and trunk lid for water ingress, and verify that the components of the electric tailgate are free from water and functioning properly. Also, check the control modules and wiring harnesses on the trunk and tailgate.
Latest Updates
Due to recent heavy rainfall in several cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?
Before we knew it, the Spring Festival holiday is already over, and the Mengshi team has been back at work for two days now. During the holiday, we visited relatives and friends...
[Lion’s Classroom] All About Wheel Alignment
Wheel alignment is based on the vehicle’s four-wheel parameters and involves adjustments to ensure optimal driving performance and a certain level of reliability...
[Lion’s Classroom] Spark Plug Mini-Class
Our cars have thousands of components, each of which is essential. Yet many drivers focus solely on oil changes during maintenance, overlooking small parts like spark plugs. Today, we’ll show you how to determine for yourself whether your spark plugs need replacing.
[Lion’s Classroom] Handy Tips for Tire Maintenance
A journey of a thousand miles begins with a single step. Tires are like the shoes of a car—their condition directly affects driving safety. That’s why tire safety is of paramount importance, and regular maintenance is essential. Now, let’s take a look with the editor at how to properly care for your car’s tires!
Recently, Volvo officially awarded Mingshi Lubricants the VCC RBS0-2AE standard certification for its SN 0W20 product. One technological breakthrough after another has once again demonstrated the exceptional quality of Mingshi Lubricants.