The reason why the wiper is not clean

1. The angle of the wiper

The angle of the wiper will cause the wiper to be unclean. Just adjust it lightly. If the pressure of the wiper is too large, try to relax the spacing between the springs at this time.

2. There is a foreign body on the wiper

The wiper brush is not clean. It may also be caused by foreign matter between the wiper blade and the windshield. At this time, we have to check whether there is any foreign matter. If there is any foreign matter, clean it up. In addition, it may be possible. Because the wiper blade is too rough, we clean it with a rag and rub it lightly with fine sandpaper.

3. Hardened wiper

Vehicles parked outside for a long time cannot avoid the sun and rain, which will inevitably accelerate the aging of the wiper rubber, so the scraping effect is naturally not so obvious. At this time, a new wiper must be replaced as soon as possible.

4. Do not spray water when using the wiper

Whenever the wiper is used, it is necessary to open the cleaner and flush and brush it to avoid direct "dry brushing", which will affect the service life of the wiper. During use, check whether there is water in the spray bottle; whether the nozzle is blocked; whether the spray motor is working normally, etc.

Tips for correct maintenance of wiper

1. Clean the wiper regularly

　　 The long-term accumulation of stains on the wiper strip will corrode the strip, resulting in deformation and aging of the strip! When washing the car or parking for a long time, the wiper can be raised to achieve the protection effect. The correct method is to lift the wiper first when washing the car or washing the wiper, and rinse it in the direction of the rubber strip with light force. Be gentle.

2. Use a special cleaning agent

　　General household laundry soap or other household cleaning products are the killer that causes the adhesive strips to harden, so it is recommended that the car owner should help the car choose a special cleaning agent. Another very important detail to remind is that different cleaning agents should never be mixed. This is very likely to produce chemicals that corrode the wiper rubber, and inadvertently cause damage to the wiper.

3. Regular lubrication

　　 The junction of the wiper arm and the tension spring of the wiper arm should always be lubricated with a loosening agent to reduce the friction between the wiper and the glass. At the same time, it can also remove dirt, protect the wiper, and extend the service life.

Wipers are used very frequently in rainy days

Lion Lubricant reminds you

For your safety

Be sure to check and maintain the wiper!