“Lion Class”: Ten Causes of High Engine Oil Temperature
Release time:
2018-08-21
In addition to routine engine use and maintenance, oil management is often overlooked by many users. If oil temperature or pressure becomes abnormal, the engine can experience a range of issues, potentially even stalling. When oil temperature remains above 120°C for an extended period, it loses its ability to lubricate, clean, and dissipate heat; in severe cases, this can lead to bearing failure and crankshaft seizure.
Here, the editors at Mengshi have compiled 10 common causes of excessively high engine oil temperatures—let’s take a look.


Oil level is too low or too high.
Many drivers make the mistake of believing that more oil is always better when changing their engine oil. Too much oil increases friction and resistance, while too little fails to provide adequate lubrication and cooling. Therefore, when changing your oil, always follow the markings on the dipstick and avoid overfilling or underfilling.
Oil pump failure
Typically, a vehicle’s instrument panel includes an alarm for low oil pressure. If the corresponding warning light illuminates during operation, it indicates a malfunction in the oil pump, and you should promptly have a qualified mechanic perform repairs. In addition to the oil itself, the oil pump can also be a cause of abnormal oil pressure.
Coolant temperature too high
If the water-cooling system in the engine overheats and fails to cool the engine components promptly, removing the heat, the heated parts will in turn cause the oil temperature to rise.
Therefore, regularly inspect key components of the engine cooling system, such as the water pump and oil cooler, to ensure that the engine’s cooling system is functioning properly.
The oil cooler is clogged.
If the oil cooler becomes clogged, it will directly impair the oil’s ability to dissipate heat and may also lead to other issues, such as insufficient oil pressure.
During routine maintenance, the oil cooler should also be inspected regularly; if any issues are detected, it should be promptly cleaned or replaced.
The oil filter is clogged.
When changing the engine oil, the oil filter should also be replaced at the same time. If it is not changed for an extended period, the filter can become clogged, losing its ability to trap contaminants in the oil. As a result, the oil bypasses the filter and flows directly back into the engine through the bypass valve, leading to increased internal wear.
The piston rings do not seal properly.
If the engine piston rings do not seal properly, it can also cause the oil temperature to rise excessively. When cylinder leakage occurs and crankcase ventilation becomes excessive, engine oil is carried out of the engine along with the vented gases. Therefore, regularly inspecting the sealing integrity of the engine piston rings and cylinders is of great importance.
Bearing clearance is too large.
Excessive clearance between the bearing shell and journal results in excessive oil leakage, leading to low oil pressure and an inability to form a proper lubricating oil film. This can, at best, exacerbate wear, and at worst, cause scoring or scorching of the friction surfaces.
The engine is operating under heavy load.
When the engine operates under heavy load—essentially, in an overloaded condition—it also causes the oil temperature to rise, since higher pressure generates more heat.
When the engine oil cannot promptly meet the engine’s cooling requirements, the temperature will also rise sharply. Therefore, we should strive to avoid operating the engine under overload conditions for extended periods.
The engine is assembled too tightly.
As with other mechanical systems, when the internal mechanical components of an engine are assembled too tightly, frictional resistance rises sharply, generating substantial heat and increasing the thermal load on the engine oil beyond its designed operating thermal‑load coefficient.
If this issue occurs in a new vehicle or after an engine overhaul, it usually resolves itself after a period of break-in. If there is no improvement after the break-in period, the vehicle should be returned to the factory for repair promptly.
Low-quality motor oil
Using engine oil that is incompatible with the engine, or low‑quality oil, can increase internal friction, leading to more pronounced temperature rises and a corresponding increase in oil temperature.
Therefore, in everyday use, in addition to selecting an oil grade and viscosity that match your engine, you should also purchase it through authorized channels.

For top-quality motor oil, choose Lion Lubricants <<<<
For customers who choose Lion lubricants, we’ll first gather information about your vehicle model and, based on its mileage and age, recommend a Lion lubricant with the ideal viscosity and grade.


Mengshi fully synthetic lubricant boasts exceptional shear stability, ensuring reliable lubrication even under demanding operating conditions and extending engine life. It is a premium‑grade motor oil rigorously tested by racing teams and champion drivers!
Latest Updates
Due to recent heavy rainfall in several cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?
Before we knew it, the Spring Festival holiday is already over, and the Mengshi team has been back at work for two days now. During the holiday, we visited relatives and friends...
[Lion’s Classroom] All About Wheel Alignment
Wheel alignment is based on the vehicle’s four-wheel parameters and involves adjustments to ensure optimal driving performance and a certain level of reliability...
[Lion’s Classroom] Spark Plug Mini-Class
Our cars have thousands of components, each of which is essential. Yet many drivers focus solely on oil changes during maintenance, overlooking small parts like spark plugs. Today, we’ll show you how to determine for yourself whether your spark plugs need replacing.
[Lion’s Classroom] Handy Tips for Tire Maintenance
A journey of a thousand miles begins with a single step. Tires are like the shoes of a car—their condition directly affects driving safety. That’s why tire safety is of paramount importance, and regular maintenance is essential. Now, let’s take a look with the editor at how to properly care for your car’s tires!
Recently, Volvo officially awarded Mingshi Lubricants the VCC RBS0-2AE standard certification for its SN 0W20 product. One technological breakthrough after another has once again demonstrated the exceptional quality of Mingshi Lubricants.