[Lion’s Share] No need to scroll through TikTok—here are eight essential car‑maintenance tips!
Release time:
2018-12-17
1. Clean leather seats with soap.
Leather seats are vulnerable to scratches from hard objects and even more susceptible to damage from chemical cleaning agents. Using a highly mild, transparent soap not only cleans effectively but also leaves the leather soft and glossy once it dries. To apply, soak a clean, soft towel in warm water, work an appropriate amount of soap evenly onto the cloth, and gently wipe the seat. If the towel becomes noticeably soiled, it indicates that the dirt has been removed. After wiping with soap, allow the seat to air‑dry; then give it two thorough wipes with a damp towel to ensure no soap residue remains. This method restores the leather to a clean, supple, and fresh condition—just as good as new. It’s also suitable for plastic trim on door panels and the dashboard, because soap (especially bar soap) is highly effective at removing grime yet gentle on human skin, making it particularly well‑suited for genuine leather surfaces.

2. Remove scratches with toothpaste
Bright car paint often develops fine scratches without warning. For owners, taking the car to a detailing shop for sanding and waxing can be costly, so using toothpaste to gently buff out minor scratches is a practical alternative with good results. First, rinse the scratched area with clean water, then take a clean cloth or towel, apply a small amount of toothpaste, and gently rub the scratch repeatedly. Once the scratch has faded or disappeared, wipe it dry with a damp cloth. The principle is simple: toothpaste itself is an abrasive used to clean teeth—safe for human use and gentle on paint.

3. Use wind oil to remove adhesive residue.
The various stickers affixed to a car’s windshield during annual inspections are extremely difficult to remove. Apply some wind oil to the back of the adhesive sticker; after it has soaked in for a moment, vigorously wipe it off with a dry cloth—no residue will remain. This method works well for adhesive labels on all kinds of products, as wind oil can dissolve the active ingredients in the adhesive. If you don’t have wind oil, toothpaste can be used, though the results may be slightly less effective.

4. Use talcum powder to loosen and remove adhesive residue from the door seal.
After rain, the car door seals become damp and stick to the paintwork, making it difficult to open the door and producing a squeaking sound. Applying a thin layer of lubricant to the rubber seal inside the door gap will eliminate these issues, allowing the door to open and close smoothly with no noise.

5. Extend the service life of the silencer
Drill a small hole at the lowest point beneath the muffler. The principle is simple: to drain water and prevent corrosion.

6. How to Get Started and Accelerate Quickly
When the vehicle is unladen or lightly loaded, you can start in second gear without worrying about damaging the engine—first‑gear gears and the clutch are designed for heavy‑load conditions, and on most cars shifting from first to second isn’t smooth. Once you’ve revved the engine past 3,000 rpm, quickly shift into third, then rev it again above 3,000 rpm; at that point, most vehicles will have fallen behind. You can then smoothly transition to fourth and fifth gears, or even skip straight to fifth (especially after paying a toll on the highway), all without increasing fuel consumption.

7. How to Maintain Tires Car tires and rims are the parts that get dirty most easily. That’s why tire maintenance is a crucial aspect of car care. Before washing your tires, grab a brush with a long handle; if they’re not overly soiled, a standard car‑wash detergent will do. Only if there’s a heavy buildup of grime should you consider using a specialized tire cleaner.

Do not use a brush on chrome‑plated, mirror‑finished wheels, as it will leave noticeable scratches. For chrome wheels, start with a sponge and reserve the brush for hard‑to‑reach areas. Once the tires and the lower half of the car are thoroughly cleaned, the entire vehicle will look sleek and gleaming.
8. How to Clean the Instrument Cluster
For self‑cleaning, use a soft brush to gently scrub the dashboard, air‑conditioner vents, switches, buttons, and other surfaces daily; after cleaning, apply a coat of dashboard wax. For the headliner, use a car vacuum cleaner to remove dust.

Latest Updates
Due to recent heavy rainfall in several cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?
Before we knew it, the Spring Festival holiday is already over, and the Mengshi team has been back at work for two days now. During the holiday, we visited relatives and friends...
[Lion’s Classroom] All About Wheel Alignment
Wheel alignment is based on the vehicle’s four-wheel parameters and involves adjustments to ensure optimal driving performance and a certain level of reliability...
[Lion’s Classroom] Spark Plug Mini-Class
Our cars have thousands of components, each of which is essential. Yet many drivers focus solely on oil changes during maintenance, overlooking small parts like spark plugs. Today, we’ll show you how to determine for yourself whether your spark plugs need replacing.
[Lion’s Classroom] Handy Tips for Tire Maintenance
A journey of a thousand miles begins with a single step. Tires are like the shoes of a car—their condition directly affects driving safety. That’s why tire safety is of paramount importance, and regular maintenance is essential. Now, let’s take a look with the editor at how to properly care for your car’s tires!
Recently, Volvo officially awarded Mingshi Lubricants the VCC RBS0-2AE standard certification for its SN 0W20 product. One technological breakthrough after another has once again demonstrated the exceptional quality of Mingshi Lubricants.