[Lion’s Lecture] Why Must Turbocharged Engines Use Synthetic Oil?
Release time:
2018-10-20
Compared with naturally aspirated engines, turbocharged engines deliver greater power; however, they also generate significantly higher peak combustion pressures and average temperatures during operation.

High-temperature performance requirements are stringent.
The turbocharger operates by using the inertial force of exhaust gases expelled from the engine to drive a turbine housed within the turbine housing. This turbine, in turn, rotates a coaxial impeller, which compresses air supplied through the air‑filter duct and forces it into the cylinder at higher pressure. During this process, the turbocharger is exposed to high‑temperature exhaust gases, resulting in extremely elevated operating temperatures, which… The engine oil is required to exhibit excellent high-temperature oxidation stability.
When a turbocharged engine is idling at 2,000 rpm for one minute, its temperature can reach 388°C—well beyond the high‑temperature limit of mineral oil. If mineral oil is used, oil consumption becomes very pronounced. Moreover, at elevated temperatures, mineral oil is prone to sludge buildup and, under prolonged heat exposure, to carbon deposits, both of which adversely affect oil seal elasticity and turbocharger cooling. In contrast, synthetic oils boast a higher HTHS (high‑temperature high‑shear) viscosity index, resulting in a more robust oil film that ensures consistent performance over extended service intervals.


High shear resistance is required.
Typical turbochargers operate at a rotational speed of 100,000 rpm, which is 20 to 30 times the engine’s crankshaft speed. As the rotor spins at high speed, lubricating oil fills the clearances between the bearings and the rotor shaft, as well as between the bearings and the housing, enabling the bearings to rotate in the same direction as the rotor shaft within an inner and outer oil film. The oil then returns to the oil pan via the scavenge line; during this process, The engine oil is subjected to repeated shear. 。
The higher the machine speed, the better the oil’s shear stability must be. Only in this way can the lubricating performance of engine oil at high speeds be ensured. Synthetic motor oils have a strong oil film and a stable molecular structure, making them far superior to mineral oils in shear stability.


High cleanliness requirements
The high power output of a turbocharged engine stems from its precise design and manufacturing processes, which also impose demanding operating conditions. The clearance between the turbocharger’s bearings and the rotor shaft is extremely tight; even the slightest contamination can cause catastrophic friction‑induced damage to the components. Therefore, It places extremely high demands on the cleaning and protective performance of lubricating oil. Compared with mineral oil, the detergents and dispersants in synthetic oil more effectively inhibit the formation of sludge and carbon deposits, keep the engine clean, and help extend the turbocharger’s service life.

Synthetic oil is more economical.
For the same oil‑film requirements, synthetic oils can achieve them at lower viscosities, whereas mineral oils require relatively higher viscosities to meet those standards. In other words, under identical operating conditions, synthetic oils can protect the engine even at lower viscosities. Lower oil viscosity reduces internal friction, thereby decreasing power losses and improving fuel efficiency. Furthermore, in the same service environment, synthetic oils typically have a longer drain interval; although the cost of each oil change may be higher, when factoring in the reduced frequency of oil changes, the overall cost is not significantly greater than that of mineral oil.




Mengshi synthetic lubricants provide all‑round protection for your vehicle, giving you peace of mind!
Mengshi synthetic lubricant boasts exceptional shear stability, ensuring reliable lubrication even under demanding operating conditions and extending engine life. It is a premium‑grade motor oil rigorously tested by racing teams and champion drivers!
Latest Updates
Due to recent heavy rainfall in several cities, many vehicles have required repairs after being submerged in water. So how should damage to flood‑damaged cars be assessed? What is the specific repair process for water‑submerged vehicles? And how can you prevent improper repairs?
Before we knew it, the Spring Festival holiday is already over, and the Mengshi team has been back at work for two days now. During the holiday, we visited relatives and friends...
[Lion’s Classroom] All About Wheel Alignment
Wheel alignment is based on the vehicle’s four-wheel parameters and involves adjustments to ensure optimal driving performance and a certain level of reliability...
[Lion’s Classroom] Spark Plug Mini-Class
Our cars have thousands of components, each of which is essential. Yet many drivers focus solely on oil changes during maintenance, overlooking small parts like spark plugs. Today, we’ll show you how to determine for yourself whether your spark plugs need replacing.
[Lion’s Classroom] Handy Tips for Tire Maintenance
A journey of a thousand miles begins with a single step. Tires are like the shoes of a car—their condition directly affects driving safety. That’s why tire safety is of paramount importance, and regular maintenance is essential. Now, let’s take a look with the editor at how to properly care for your car’s tires!
Recently, Volvo officially awarded Mingshi Lubricants the VCC RBS0-2AE standard certification for its SN 0W20 product. One technological breakthrough after another has once again demonstrated the exceptional quality of Mingshi Lubricants.